The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 

101 cams and gears

  • 09 Aug 2014 8:43 AM
    Message # 3069337
    Anonymous

    I am looking for Cams and gears for my 101 engine. What it the difference between bonneville cams and stock cams? Where would be the best place to purchase these items? Does anyone reproduce these Cams and gears? Thanks for your help!

  • 10 Aug 2014 9:47 AM
    Reply # 3069974 on 3069337
    Tim Raindle (Administrator)

    Juergen Hecker had cams a few years ago, I think, Dave.

  • 10 Aug 2014 3:17 PM
    Reply # 3070090 on 3069337

    You can find a good comparasion here

    http://virtualindian.org/8techcams.htm

    If you want a modern grind of cams you'll find it here http://www.performanceindian.com/TechTalk.html

    http://www.performanceindian.com/Tuning.html

    Don't forget you need a good set of springs. I used some bad new ones and I suspect that was the cause of seats worn down in short order!

    Last modified: 10 Aug 2014 3:21 PM | Carl-Erik Renquist
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software