The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 

Tapered Fork Neck Bearings

  • 23 Aug 2010 7:05 PM
    Message # 407378
    Deleted user

    Hi listers,

    I'm restoring my 1930 101 and wanted to change out from ball bearings to tapered roller bearings.  I found a top bearing with no problem but am stumped on the bottom.  The measurements as I measured them are 2 1/8 inch OD and 1 1/4 inch ID.  One of the suppliers in Europe has a full kit but with the exchange rate and shipping it's nearly $500.  A little rich for my blood.  Has anybody found a bearing that will fit the bottom stem?  If so do you have a brand and a number? 

    Thanks!

    "Nevada" Bob

  • 24 Aug 2010 7:27 AM
    Reply # 407638 on 407378
    Tim Raindle (Administrator)
    Bob Clift wrote:

    Hi listers,

    I'm restoring my 1930 101 and wanted to change out from ball bearings to tapered roller bearings.  I found a top bearing with no problem but am stumped on the bottom.  The measurements as I measured them are 2 1/8 inch OD and 1 1/4 inch ID.  One of the suppliers in Europe has a full kit but with the exchange rate and shipping it's nearly $500.  A little rich for my blood.  Has anybody found a bearing that will fit the bottom stem?  If so do you have a brand and a number? 

    Thanks!

    "Nevada" Bob


    hi bob , jorgen sundberg at grevbo in sweden sells real nice standard kits that fit beautifully , and work well . why change ?                                                                             

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

  • 01 Sep 2010 3:01 PM
    Reply # 412110 on 407378
    Hi Bob
     I found a bearing with correct inside diameter ,slightly larger outside diam,cleaned it , glued it together with super glue or Locktite,cant quite remember then had it ground externally to size,Worked well < i cant remember the bearing number tho!
     regards phil
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software