The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 

1930 101 seat positions

  • 11 Jan 2021 11:27 PM
    Message # 9850746

    I’m looking for some advice from fellow 101er’s that are tall. I’m 6’ 4” and throughly enjoy riding my 101. The seat is all the way back on adjustment and works but I was interested on what maybe others have done.

    Thanks,

  • 12 Jan 2021 2:12 AM
    Reply # 9850882 on 9850746

    I made a longer Yoke  for the coil springs   for both my 101,s  Im 6ft 2"  Makes it way better for Myself and my Wife. and reshaped the  Front  connection a little   to raise the nose of the seat.

    Phil 

  • 12 Jan 2021 10:04 AM
    Reply # 9851409 on 9850746

    You can also flip the spring hanger strap over so the tabs point up, this lifts the rear of the seat a bit as well.

  • 12 Jan 2021 11:36 AM
    Reply # 9851648 on 9850746

    Thanks Phil and Eugene!

    Do you have any photos to share for a visual look? Also how much more did you add to the yoke Phil in inches?

    Thanks,

  • 13 Jan 2021 1:49 AM
    Reply # 9853801 on 9851648
    Harold Schell wrote:

    Thanks Phil and Eugene!

    Do you have any photos to share for a visual look? Also how much more did you add to the yoke Phil in inches?

    Thanks,

    Both my Yokes are 310mm from Top  to bottom of thread. One original  I have is 260mm   On one of mine  I made some threaded sleeves up  that are tapered   so as to not show  .The Other I made new.


  • 13 Jan 2021 12:56 PM
    Reply # 9855594 on 9850746

    Great tip Philip!

    Did you lengthen your front connection as well?

    Thanks,

 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software