The 101 Association, Inc. - Engine bolt spacers

The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"

Subscribe to topic

04 May 2015 2:07 AM

Quote

Message # 3326125

Mike Byrne

Hi. I need to know the dimensions of the two spacers that fit between the engine mounting bolt and the frame lugs.

Mike.

05 May 2015 5:24 AM

Quote

Reply # 3327730 on 3326125

Carl-Erik Renquist

The spacers are 25,4mm tall with a 16,3mm hole. Outer diam. is 25,4mm with a 33mm diam. rim that is about 3,5mm thick.

Last modified: 05 May 2015 5:25 AM | Carl-Erik Renquist

05 May 2015 1:25 PM

Quote

Reply # 3328329 on 3326125

Mike Byrne

Hi Carl,

Thanks for that. I suspected mine were incorrect and you have proved it !!

Mine are only around 1mm thick and float about on the engine bolt. I will turn up some nice ones in brass. (I will not need to paint them !!)

Mike.

AMCA Chapter WebRing

AMCA National

Next >> Random Hub << Prev

Classic Motorcycle Webring
Join Now \| Ring Hub \| Random \| << Prev \| Next >>