The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 
Forgot password

1929 Four 402 rear brake frame lug dimensions

  • 14 Jan 2016 10:24 PM
    Quote
    Message # 3759866
    Deleted user

    I am looking for pictures  showing a tape measure up against the rear brake lug that is factory welded to the left rear lower frame tube of a 1929 Indian four 402.  I am trying to replicate this piece for my frame that is missing this item.  I am looking for pictures showing the dimensions of the brake lug and the distance it is located from the rear wheel frame casting. If anyone can help, please send pictures to popsart@mac.com 

    Last modified: 15 Jan 2016 11:52 AM | Deleted user
  • 15 Jan 2016 8:12 AM
    Quote
    Reply # 3760546 on 3759866
    Carl-Erik Renquist

    For what I can see, the brake lug is a part of the casting for the upright tube in the middle. I have very little pic. references, but i'll send a couple.


    Oh, disregard what I wrote, the pics are so poor that i didn't notice the bracket!

    Last modified: 15 Jan 2016 8:33 AM | Carl-Erik Renquist
  • 15 Jan 2016 11:29 AM
    Quote
    Reply # 3761409 on 3759866
    Deleted user

    I appreciate the photos sent.  I am going to try and replicate the brake lug. With that, if someone out there could put a tape measure up against frame and brake lug, that would help me. I am looking for width and height of the brake lug and the width from the rear frame casting. Hope this makes more sense than my first post. 

    Jerry
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring
Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software