Hi, the threads on my cylinders where the exhaust header is fastened are all buggered up. I measured them at 1.5" - 18 tpi. But they're bad enough I wonder if there's metal loss and they actually should be a larger diameter than the 1.5". Can't find the number in the R&O. BTW this is for a 37 c.i. set of cylinders. Can anyone please confirm what size the exhaust spigots were originally? Thanks!
Never mind, found it! 1 9/16 - 18, 28B70
Well found, and thanks for posting the size for reference for others Harry.
... and I will sheepishly admit it IS in the R&O, on the great list Carl Erik put together (page 49B). I only needed to cross reference the part number 28B70, which I was able to find on the Walker Engineering site!
Copyright © 2009 The 101 Association, Inc. All rights reserved.